[Elecraft] THANKS! RE: Differenced Between Filter "KFL3A-2.8_2.7sw" and "KFL3A-2.8K"?

[Jeff Maass]

Thanks to all who replied. 

I understand now that the separate price for initial orders to account for the swapping of
the standard 2.7-KHz part with the 2.8-KHz part. 

When I ordered my K3/100 (s/n 1192), the 2.8-KHz filters were backordered. This predated
the separate part numbers. The 2.8-KHz filter for the K3 main receiver was received here a
while ago as the backorder cleared, but has not yet been installed. I just wanted to make
sure that I can still swap in that part while I'm also installing the KRX3.

KRX3 installation tomorrow (Friday)!


73,  Jeff  K8ND


> -----Original Message-----
> From: Jeff Maass [mailto:jmaass at k8nd.com] 
> Sent: Thursday, January 01, 2009 10:37 PM
> To: 'elecraft at mailman.qth.net'
> Subject: Differenced Between Filter "KFL3A-2.8_2.7sw" and 
> "KFL3A-2.8K"?
> 
> 
> I was planning to take a block of hours tomorrow to add the 
> KRX3 to my K3/100. 
> 
> One of the things to do is to replace the 2.7-KHz filter with 
> the 8-pole 2.8-KHz filter in the main receiver. I have one 
> "KFL3A-2.8K" that I ordered a while ago for this purpose. 
> 
> Now I see from the Elecraft order page that there is the note:
> 
>    "Order KFL3A-2.8_2.7sw instead if replacing
>    2.7 kHz stock filter."
>