[Elecraft] RE: KRX3 Inventory Question: "Foam Pads": THANKS!

[Jeff Maass]

Thanks to all who responded with information for using the foam included, either by
splitting it into two pieces or using it as a single strip. 

Further inventory checks found a bigger problem in the parts received. The box labeled as
containing a 2.8-KHz filter contained instead a 6-KHz filter! Email has been sent to
Elecraft for an exchange ASAP.


73,  Jeff  K8ND


> -----Original Message-----
> From: Jeff Maass [mailto:jmaass at k8nd.com] 
> Sent: Thursday, January 01, 2009 3:54 PM
> To: 'elecraft at mailman.qth.net'
> Subject: KRX3 Inventory Question: "Foam Pads"
> 
>  
> I have just inventoried my KRX3 box preparatory to installing 
> it into the K3.
> 
> All the items on the inventory appear to be as needed, except 
> in the D850334 "KRX3 Hardware Bag".
> 
> I do not have anything labeled E850324, "Foam Pads".
> From the photo, this appears to include two foam strips.
> 
> What I have instead is an envelope labeled as E980148, which 
> contains one foam strip. 
> 
> Am I headed for a delay, or is only one pad required? 
> 
> 
> 73,  Jeff  K8ND
>  
>