[Elecraft] KX1, Removing Underside of Board

[Bernie Gardner]

As Don said, you just need to bend the case out a little to clear the keyer 
connector.  You didn't mention it, but I assume you removed the tuning knob. 

I  had a similar failure to turn on a while ago and found that the switch 
wasn't working.   I just sprayed it with contact cleaner and worked it a few 
times and it has been ok since.

Bernie
W1AZ

On Wednesday 31 December 2008, MASH wrote:
> New Year Greeting Everyone:
> It has been a longtime since I buit the KX1.  I turned on the
> radio to find it would not turn on. The lamp goes on.  I am
> trying to find the fuses. They must be on the underside of the
> board. I am having trouble removing the board.  I removed the 3
> screws from the front panel.  This still does not remove the
> board. The keyer connector seems to be sticking. Any advise is
> welcome on this problem.
> Happy New Year,
> Cliff, AC6C
> --
>   MASH
>   mash4077 at mailsent.net