[Elecraft] K3 QRPp

[Lyle Johnson]

> If I want to operate at say, 1 watt I believe all I have to do is 
> adjust the power out and it will go from 100mw to 120W using the main 
> antenna 1 or 2.

Yes.

> If that is true, how does one select and use less that that? 

Set up the transverter band per page 39 in the manual (latest rev D-2).

Use the XVTR OUT connector for the Tx output.

Be sure to run the transmit calibrations routine from the K3 Utility for 
the milliwatt output.  See the help in K3 Utility for details.

If you want to force the radio to use milliwatt level output on the KXV3 
without first setting up a transverter band, then set CONFIG:KXV3 TEST. 
  See page 49.
73,

Lyle KK7P