[Elecraft] [microHAM] Re: Microham cabling

[W0MU Mike Fatchett]

That might work and allow for more flexibility if you moved the rig to
another location and were not using the MK2R or other MH product. 


"A slip of the foot you may soon recover, but a slip of the tongue you may
never get over." Ben Franklin
-----Original Message-----
From: microHAM at yahoogroups.com [mailto:microHAM at yahoogroups.com] On Behalf
Of Richard Detweiler
Sent: Friday, February 27, 2009 12:21 PM
To: microham at yahoogroups.com; elecraft at mailman.qth.net; w0mu at w0mu.com
Subject: RE: [microHAM] Re: [Elecraft] Microham cabling


Why redo the connector?

 

Just create jumper cable with a connector to plug in the existing Microham
cable, then a connector to plug into the K3.

 

Add the wires from the K3 connector you want and pass the wires to the
microham cable connector that microHam needs.


This way you leave the microHam cable intact.


Best Wishes
Richard
K5SF




 


To: microHAM at yahoogroups.com; elecraft at mailman.qth.net; w0mu at w0mu.com
From: ab7r at cablespeed.com
Date: Fri, 27 Feb 2009 14:12:49 -0500
Subject: [microHAM] Re: [Elecraft] Microham cabling





Thanks for the heads up Mike!!! I just got the K3R cable and was going to be
doing the same thing for the AuxBus line. I guess MH did this to help keep
the wires from breaking of the connector but you are 100% correct, it makes
access to the other connections impossible without completely redoing the
connector with a new one. 
Doing it this way was a bad move IMHO. I may just replace them connector
with RCAs and use my LDG breakout box. 

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065 


On Fri Feb 27 10:20 , "W0MU Mike Fatchett" sent: 

>I have a couple of Microham cables that go from the K3's to the MK2R+. 
>I am getting setup to run SO2R and was in the process or hooking up my 
>bandpass filters and the 6m pre-amp which uses a pin on the accessory port.
> 
>I took apart the Microham accessory connector and was going to solder 
>on the connections I needed for my band decoder and the connection for 
>the 6m preamp.
> 
>Once I got the connector apart, I found they have filled the inside 
>with a white semi-solid compound. The compound does not seem to come 
>off very easily. While I am sure this material probably makes the cable 
>better it sure makes if very difficult for those of us wishing to use 
>the other features of the accessory connector on the K3.
> 
>I haven't decided if it will be easier to cut off the connector and 
>start over or try to cut away the white stuff with an exacto knife.
> 
>A nice value add would have been to bring out the unused connections in 
>a cable for those other uses.
> 
>Just a heads up for others that might have been going down this path. 
> 
>__________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net
> 
>This list hosted by: http://www.qsl.net Please help support this email 
>list: http://www.qsl.net/donate.html











[Non-text portions of this message have been removed]



------------------------------------

This list is for the exchange of information about the use and operation of
microHAM products.  

Anyone with specific hardware support issues should contact microHAM support
at mailto:support at microHAM.com.

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/microHAM/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/microHAM/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:microHAM-digest at yahoogroups.com 
    mailto:microHAM-fullfeatured at yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    microHAM-unsubscribe at yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/