[Elecraft] Cross mode split not working.

[G4LNA]

wayne burdick wrote:
> 
> 
> Hi Paul,
> 
> I'm sorry to report that only a few modes are presently allowed for 
> cross-mode split (CW/SSB, LSB/USB, CW/CW REV). Our goal is to add other 
> modes back in if there's enough interest. Each requires considerable 
> firmware modification and re-testing.
> 
> Is AM/SSB a common split?
> 
> Note that you can achieve this without using SPLIT if you have the 
> sub-receiver installed. For example, you could transmit/receive in SSB 
> mode on VFO A on one frequency, and receive AM on the sub on a 
> different frequency. If you want to hear only AM signals, adjust the 
> main and sub volume levels accordingly.
> 
> 73,
> Wayne
> N6KR
> 

Thanks Wayne,

In that case it's strange that it was working before, but not now. I haven't
got the sub RX and probably won't get it anytime in the near future with the
exchange rates the way they are at present. 

I wouldn't say it's exactly a common split, but it's really handy to insert
the carrier and receive the AM as a pseudo synchronous set-up, it cuts down
the noise and the fidelity is excellent, especially on the K3.

73
Paul. G4LNA.




-- 
View this message in context: http://n2.nabble.com/Cross-mode-split-not-working.-tp2382176p2385709.html
Sent from the Elecraft mailing list archive at Nabble.com.