[Elecraft] K3: copying 5 weak signals within a 50hz BW

[Merv Schweigert]

Yes as matter of fact I do have a second radio sitting alongside the K3 
and I
split the antenna to both receivers for receive, so its a apple to apple
comparison,  the second radio had no problems at all in the pile up,  was
not going to mention I used the second radio to work the pileup and
then went back to the K3 later. 
I know someone will ask,  second radio is a modded FT-1000D.  not mp
not mk v not field,  modded D..
Merv KH7C
> OK...so we (several of you) have identified a similar situation of
> "mushiness."
>
> Just out of curiosity, did anyone have a 2nd receiver (non-K3) handy
> to see if IT could "copy" the signals cleanly?
>
> Also...
> IMO, copying a slight tone shift (ala W4ZV link, which is VFB) is a
> lot different than trying to copy multiple (weak) signals all at about
> the same pitch, all of which are sending digital (cw) information.  I
> think the brain will try to zero in on one, but that will be
> exceedingly difficult to do, since no one signal ends up being an easy
> focus.
>
> Thanks,
> de Doug KR2Q
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>