[Elecraft] K3 receiver desensing on CW during contest

[Darwin, Keith]

I'm at work and don't have time to check any of this ... But I was under
the impression that it was not this way.  Signals outside of the DSP
passband but inside the roofing filter passband would activate the DSP.
So, with a 2 KHz roofing filter and a 200 Hz DSP, you'd have very few
signals being heard by the OP but lots of signals affecting the AGC.

- Keith N1AS -
- K3 711 -

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Steve Ellington
Sent: Monday, February 23, 2009 1:58 PM
To: Jim Brown; Elecraft List
Subject: Re: [Elecraft] K3 receiver desensing on CW during contest

Is this correct?
If a cw signal falls within the DSP passband it should and will pump the
AGC. If a CW signal falls outside the DSP passband it should not pump
the DSP's AGC. Steve Ellington
N4LQ at carolina.rr.com