[Elecraft] K2 deaf on 40 m

[Svend Spanget]

Don,

thank you for answering! This K2 used to work, but after I got my K3, it
was left in the background...
It will tune to a good SWR.
The K60XV option is not installed.

73
Svend, OZ7UV

----- Original meddelelse -----

> Fra: Don Wilhelm <w3fpr at embarqmail.com>
> Til: Svend Spanget <spanget at privat.dk>
> Cc: elecraft at mailman.qth.net
> Dato: Lør, 21. feb 2009 19:57
> Emne: Re: [Elecraft] K2 deaf on 40 m
> 
> Svend,
> 
> Is this a newly built K2, or one that used to work and has now
> failed.
> Do you have the K60XV option?
> If it is newly built, check to be certain you have installed C6 (on
> the
> bottom of the RF Board near the rear panel) correctly. Its leads
> should
> be in the outer holes of the set of 3 holes between L1 and L2.
> 
> If you installed the headers for the K60XV option (or the rework
> eliminators), you must insert the board into J15. Does it receive on
> 60
> meters?
> 
> If this is a K2 that worked before, there is likely some failure in
> either in the Bandpass Filter or the Low Pass Filter.
> Does it transmit on 40 meters?
> 
> 73,
> Don W3FPR
> 
> 
> Svend Spanget wrote:
> > Hi all.
> >
> > My K2 is working fine on 160m, 80m, 30m and 20m but not 40m. I have
> > switched between ANT1 and 2. RANT is OFF. Nothing helps...
> > What went wrong for me?
> > Any settings to check or could it be a hardware failure?
> >
> > 73,
> > Svend OZ7UV
> >


____________________________________________________________

TDC Bredbånd for 0 kr.
- Spar 695 kr. Se http://tdc.dk/freemailtilbud/

Denne mail er sendt via Mail på TDC Online
- Læs mere om TDC's mailtjeneste på http://mail.tdconline.dk/
____________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090221/9f8a6b8e/attachment.html