[Elecraft] W1 LED Part Numbers

[Bill Johnson]

I am not sure if they match the output of the W1's red leds.  IF they do
perfect.  Can anyone test?


Bill


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tom, N5GE
Sent: Friday, February 20, 2009 10:47 AM
To: Ken Kopp
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] W1 LED Part Numbers

On Fri, 20 Feb 2009 03:52:17 -0000, you wrote:

>I have a "set" of additional green and yellow LED's
>from Scott at Aptos.  He got them for me from the
>stock bins and didn't include their stock numbers.
>
>I'll light them with a PS and see if their all the same
>brightness and take a photo.
>
>They -should- be the same product line and therefore
>light equally, I'd think.  They're from the KAT-100
>tuner.
>
>Scott was at least receptive to making all the W1
>kits with three colors of LED's.
>
>73! Ken


Good information, Ken.

Last night just before crawling into the sack I realized another
source of the Elecraft PN's might be the LED's used in the power out
displays of the  XVTR's.  You can probably get them by downloading one
of the XV*** manuals.

73,

Tom, N5GE

K3 806
XV144
XV432

http://www.n5ge.com
http://www.swotrc.net

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html