[Elecraft] Using CONFIG: VFO OFS

[Don Wilhelm]

Lance,

If you vary the step size with CONFIG: VFO CRS, you will quickly 
discover that it is PER BAND and PER MODE.

73,
Don W3FPR

Lance Collister wrote:
> Roy Morris wrote:
>   
>> I did not know the RIT/XIT knob can tune VFO A in large steps when both 
>> RIT and XIT are turned off.  Go to CONFIG: VFO OFS and set to ON and go 
>> to CONFIG: CRS to vary the step size.  This does not change the RIT and 
>> XIT functions when they are turned on.  They operate the same as before.
>> This is listed in the CONFIG MENU, and I had not noticed it.  I am not 
>> quite sure how I will use this feature, but it is nice to have.  Roy 
>> Morris  W4WFB 
>>
>>
>>     
> MNI TNX for the very useful tip!  I have only scratched the surface of the 
> valuable features hidden inside the menus of the K3, and this is certainly a 
> feature I will implement today and use for rapid tuning.  VY 73, Lance
>   
>