[Elecraft] K2 stacked over KAT100

[Don Wilhelm]

John,

In the KAT100 kit, there are 2 anti-slide brackets PN E100150 that mount 
on the top rear of the KAT100 enclosure.  The projections on these 
brackets fit into the recessed holes in the rear feet of your K2.  Page 
30 of the KAT100 manual shows how they are mounted.

If you ordered the KAT100-2 (the one that mounts in the EC-2 enclosure), 
those brackets are not included.  Normally the KPA100 is mounted in the 
EC-2 with the KAT100, and the K2 should not be stacked on top of that 
assembly because it restricts the air flow.

73,
Don W3FPR

John Wiener wrote:
> Hi
>
> I don't recall where I saw this but I think someone posted a smart  
> way to keep the K2 from slipping slowly off the back ot the KAT100  
> while hitting the buttons.
>
> Can someone direct me to it?
>
> Thanks!
>
> John
> AB8O
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.237 / Virus Database: 270.10.25/1955 - Release Date: 02/16/09 06:55:00
>
>