[Elecraft] cw to data questions

[Don Wilhelm]

Gary,

The TEXT DEC button acts like the menus - you must change VFO B to ON or 
OFF and VFO A changes the threshold for the decoder.

The 'IM' character issued from the paddles should stop transmission 
without a pause.  If there is a character buffered by the K3 (as there 
will be if using the K3 utility or a memory), then the buffer must clear 
before transmission will stop.
If you simply stop sending, transmission will stop 4 seconds later.

73,
Don W3FPR 

Gary Lee wrote:
> How do I turn text dec off?  Tried issuing "swh40;" no dice.  I thought it 
> would act as a toggle.
> Also, noticed when sending that "..--" does not immediately kick me out of 
> transmit mode as the manual states.
>
> Running firmware 2.78.  Issuing commands with hyperterminal.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.237 / Virus Database: 270.10.25/1955 - Release Date: 02/16/09 06:55:00
>
>