[Elecraft] 8 AWG adapter

[Timothy Raymer]

Julius:

If it is conventional 8AWG wire, it probably will fit in the 45A crimps for the Anderson Power Pole Connectors.  Those same contacts fit in the enclosures that fit our Elecraft PP.  Just be cautious when crimping it down.  If you have access to the Anderson Die Crimp tool rather than the West Mountain Combo, I would recommend using that one.

Tim Raymer
K2 #1383
73 de KA0OUV


-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Julius Fazekas
Sent: Monday, February 16, 2009 07:47
To: elecraft at mailman.qth.net
Subject: [Elecraft] 8 AWG adapter

I have some really nice 8AWG cable for my power line. Connecting to the PS is not a problem, but haven't figured out an "elegant" means to drop it down to use with 30A PP connectors. Any ideas?

Thanks,

Julius Fazekas
N2WN

Tennessee Contest Group
TnQP http://www.tnqp.org/

Elecraft K2/100 #4455
Elecraft K3/100 #366
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html