[Elecraft] Problem with Split Receive Audio?

[W0MU Mike Fatchett]

I assume you have a stereo headset?
 
 
 

"A slip of the foot you may soon recover, but a slip of the tongue you may
never get over." Ben Franklin 

 

  _____  

From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tad Williamson
Sent: Sunday, February 15, 2009 4:52 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Problem with Split Receive Audio?


Sorry if this has been answered before, but I glanced through archives and
didn't really see this exact problem.
I just finished installing the KRX3 Subreceiver and as usual the
instructions were excellent!
Everything tested OK per the instructions and before I take the radio apart
and re-check my connections, I thought I'd pose the question here.
I can't seem to get the split-audio (hear the VFO-A audio in my left ear and
the VFO-B audio in my right ear).  I followed the steps in the manual but no
dice.
Anybody, got step-by-step instructions for making this happen?
Again, it may be a cabling problem or even a problem with the sub-receiver,
but I thought I'd see if anyone else had run accross this issue before.
Thanks, 73, Tad, WF4W



"What a long, strange trip it's been"
 
The Grateful Dead
 
Truckin'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090215/c1a54ac1/attachment.html