[Elecraft] KPA3 Power calibration

Julian, G4ILO julian.g4ilo at gmail.com
Fri Feb 13 17:46:55 EST 2009




Evert Bakker (PA2KW) wrote:
> 
> Just a question about the power calibration of the K3as the procedure is
> not
> clear to me.
> 
>  
> 
> 1)       Select 160 m.
> 
> 2)       Set the power knob to 5W (on the K3-LCD display)
> 
> 3)       Set the K3 in Tune 
> 
> 4)       Measure the output power with an external power meter (I'm using
> a
> LP100) into a 50 Ohm dummy (using a professional one).
> 
>  
> 
> And now: What to do if I have a difference between the commanded (5W)
> output
> and the measured output (say 7W) ???
> 
>  
> 
The Low Power Wattmeter Calibration procedure described on page 48 of the
manual. Followed by the Transmitter Gain procedure on each band.

-----
Julian, G4ILO. K2 #392  K3 #222.
http://www.g4ilo.com/ G4ILO's Shack   http://www.g4ilo.com/blog.html G4ILO's
Blog    http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 
-- 
View this message in context: http://n2.nabble.com/KPA3-Power-calibration-tp2323313p2324253.html
Sent from the Elecraft mailing list archive at Nabble.com.



More information about the Elecraft mailing list