[Elecraft] K2, kio2,kat100

[Don Wilhelm]

Brett,

Yes, the KAT2 HiPwr indicator only comes on when the KPA100 switches in 
(that happens at power levels of 11 watts or more) - without the KPA100 
it will always be in low power.
There is no difference in tuning, it is only an indicator.

73,
 Don W3FPR

Brett Gazdzinski wrote:
> I received part of my order to combine the kat100 and the kpa100 into the 
> ec2 box, I got the rs232 interface and the kat100, and built both, no 
> problems, no missing parts, as usual.
> One thing I notice though, when I adjust the power of the k2 past 10 watts, 
> the kat100 tuner does not change to hi power.
> Does it only do that if I have the kpa100?
>
> Everything else works like it should, antenna a/b, tunes my alpha delta 
> dx-lb-plus to at least a 1.3 to 1 on all bands.
>
> Time to order the 160 meter and noise blanker options!
> The alpha delta does 160, and the street light out front of my house goes on 
> and off causing a racket in my radio!
>
> I also did the ssb filter bandwidth mod, SSB sounds REAL nice!
>
> Who needs a K3!
>
> Brett
> N2DTS
>   
>