[Elecraft] K3 TX EQ Not saving on power down

[k4dzr at juno.com]

Hi K3ers: The below is the procedure I use to activate TX EQ. TX EQ does not save when powered off. (I am not changing mode or band).  Also RX EQ setting becomes the same as TX EQ and vice versa.  Both are changed to what ever EQ number is selected. No matter if you do it from TX eq or RX eq. Anyone else see this?  Support is working on it. Running fimware 2.78   1. Select EQ5 by touching the kepad number 5 after  you are in  menu item TX EQ.  2. Tap menu again to go back to read out. 3. Go back to menu item EQ and the selection of EQ5 is still there. Tap menu to return to freq reading. (and RX EQ has been changed to EQ 5 also) 4. Turn off power.  Turn on power.  Tap menu.  Find TX EQ.  It is now set back to EQ 1 not EQ 5.  Thanks, Jerry, K4DZR  
____________________________________________________________
Save big on Stock Trading Fees. Click Now!
http://thirdpartyoffers.juno.com/TGL2131/fc/PnY6rbt6J2ffo4MXkHapq1JNVJ1HnCRHoD5SXZ8io5fx8wZOqYGQ6/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090212/57dce1c7/attachment.html