[Elecraft] K3 Sub and Main Synchronization

[GW0ETF]

Have you checked the 3rd decimal digit (Hz) by switching in FINE? I once had
this and noticed that this digit which isn't normally displayed was
different for MAIN and SUB....

73,

Stewart Rolfe, GW0ETF


Tom, N5GE wrote:
> 
> Today when I turned on my K3 #806 I noticed that when the sub and main
> vfos were both on the same frequency they sub and main receivers were
> not quite on the same frequency.  I would guess by the wavering that
> they are probably 2 to 5 hz off per second.  The wavering is heard in
> the band noise on 6m.
> 
> Is there an adjustment I can make to get them dead on.  It's not the
> first time I've noticed this.
> 
> Thanks,
> 
> Tom, N5GE
> http://www.n5ge.com
> http://www.swotrc.net
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: http://n2.nabble.com/K3-Sub-and-Main-Synchronization-tp2311506p2311772.html
Sent from the Elecraft mailing list archive at Nabble.com.