[Elecraft] K3 to SteppIR interface communication

[Jim]

Mine is set to set as KENW baud 4800.

73 de KE4WY Jim

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dick Housden, W0NTA
Sent: Monday, February 09, 2009 12:12 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 to SteppIR interface communication


Hi Jim,

I use a SteppIR with my K3 successfully by setting the baud rate to 4800.
Same for the K2.

73, Dick, W0NTA


Jim Spears wrote:
> 
> I recently replaced Icom stuff with a K3.  Now I am trying to get all the
> stuff in the shack that is supposed to communicate with each other to do
> so.
> Right now I am working on the K3 to SteppIR interface.  
> 
>  
> 
> I have a clone of the SteppIR "S13" cable and the K3 is connected directly
> to the SteppIR "Data In" port.  The SteppIR interface is set to "KENW" at
> 9600 bps; the K3 RS232 is set to 9600 bps.  SteppIR does not follow band
> changes.  
> 
>  
> 
> Anyone got a suggestion for getting this interface to work?  
> 
>  
> 
> Jim
> 
> N1NK
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 

-- 
View this message in context:
http://n2.nabble.com/K3-to-SteppIR-interface-communication-tp2298144p2298335
.html
Sent from the Elecraft mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html