[Elecraft] K3 to SteppIR interface communication

[Dick Dievendorff]

One of the necessary steps is to set the K3's CONFIG:AUTOINF to AUTO 1 so
that the K3 sends band data on its RS232 port.  Could that be the issue?

 

Dick, K6KR

 

 

From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jim Spears
Sent: Monday, February 09, 2009 8:38 AM
To: elecraft at mailman.qth.net; SteppIR at yahoogroups.com
Subject: [Elecraft] K3 to SteppIR interface communication

 

I recently replaced Icom stuff with a K3.  Now I am trying to get all the
stuff in the shack that is supposed to communicate with each other to do so.
Right now I am working on the K3 to SteppIR interface.  

 

I have a clone of the SteppIR "S13" cable and the K3 is connected directly
to the SteppIR "Data In" port.  The SteppIR interface is set to "KENW" at
9600 bps; the K3 RS232 is set to 9600 bps.  SteppIR does not follow band
changes.  

 

Anyone got a suggestion for getting this interface to work?  

 

Jim

N1NK

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090209/9fb6599e/attachment.html