[Elecraft] K3: identify when in TEST mode

[Bob Cunnings]

I would annoy me if the red TX LED flashes continuously while in test
mode since I engage it when using the K3 in receiver only mode (e.g.
when listening around, so as to not accidentally transmit on top of a
monitored QSO). I find that the flashing TX icon is sufficient
indication of test mode. As one of those who always monitor power
output to confirm transmission, I also observe that in test mode zero
power out is indicated on the K3 front panel bar graph when I key
down. What more is necessary?

Bob NW8L

On Sat, Feb 7, 2009 at 9:40 AM, Julian, G4ILO <julian.g4ilo at gmail.com> wrote:
>
> Thinking some more about this, it seems to me the most logical indication
> would be for the red TX LED to flash instead of illuminate constantly when
> transmitting in test mode. This would not annoy anyone who has engaged test
> mode to prevent accidental transmission, but would highlight the fact that
> the rig is not actually transmitting when the PTT or key is pressed.
>
> -----
> Julian, G4ILO. K2 #392  K3 #222.
> http://www.g4ilo.com/ G4ILO's Shack   http://www.ham-directory.com/ Ham
> Directory    http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
> --
> View this message in context: http://n2.nabble.com/K3%3A-identify-when-in-TEST-mode-tp2286777p2289741.html
> Sent from the Elecraft mailing list archive at Nabble.com.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>