[Elecraft] K3 main/sub band independence -- need morefirmware testers

[Joe Subich, W4TV]

> can you configure the K3 to bypass the internal ATU on 
> receive. I suspect yes.

This has been answered several times by Wayne and Lyle.  
The ATU is in-line at all times.  "Bypassed" selects 
ATU settings for a resonant (50 +/-j0) antenna.    

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of AD6XY
> Sent: Friday, February 06, 2009 3:07 AM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 main/sub band independence -- need 
> morefirmware testers
> 
> 
> 
> 
> 
> Brett Howard wrote:
> > 
> > Can't you use the RX in path since you have the XVRTR interface?
> > 
> > 
> 
> No, not if you are using one antenna. I do not yet have an 
> ATU, this was a general question, can you configure the K3 to 
> bypass the internal ATU on receive. I suspect yes. You might 
> want to do this if you were on 80m and listening for openings 
> on 40m using a dipole for example.
> 
> Mike
> -- 
> View this message in context: 
> http://n2.nabble.com/K3-main-sub-band-independence----need-mor
e-firmware-testers-tp2266953p2279962.html
Sent from the Elecraft mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html