[Elecraft] K3-EZ Software

[Stewart Baker]

Does it for me as well.
A very useful program.

Stewart G3RXQ
On Fri, 6 Feb 2009 06:18:36 -0800 (PST), Lee Buller wrote:
> While exploring the Elecraft site, I discovered K3-EZ Software 
by Bill Coleman.  See it at:
>
> http://home.roadrunner.com/~n2bc/SW.htm
>
> Now, I have no vested interest in the program, but I found it to 
be quite useful and highly recommend it.  I spend some time 
adjusting the RX equalizer and found that it is quite effective to 
my hearing loss.  It is quite amazing how you can bring up the 
highs and cut out the lows.  I have yet to deal with the TX 
equalizer.  The program seems to give me all the information about 
the K3 I need and allows me to make changes without digging 
through the menus.  Also, it will allow you to load the memories.  
Other programs are good too, but it seems that Bill's program goes 
into the depth of the rig more than others.
>
> One thing I would recommend to the user is to use a high baud 
rate than 4800.  The program goes out and changes settings and at 
4800 baud it can be quite slow.
>
> Let me also say, I have about three or four programs on my 
computer which talks with the K3 and they are all good...Bill's 
seems to go (as I said) into the "soul" of the K3
>
> Lee - K0WA
>
>
> In our day and age it seems that Common Sense is in short 
supply. If you don't have any Common Sense - get some Common Sense 
and use it. If you can't find any Common Sense, ask for help from 
somebody who has some Common Sense. Is Common Sense divine?