[Elecraft] K3 main/sub band independence -- need more firmware testers

[Brett Howard]

Can't you use the RX in path since you have the XVRTR interface?


On Wed, 2009-02-04 at 00:42 -0800, AD6XY wrote:
> Excellent. I bet it does not work with two transverters though - how could
> it? What I hope it will do is work with 6m and a transverter, for 50/70MHz
> crossband Es.
> 
> I can test but as I do not have the ATU the results might not be very
> interesting because both receivers will have to share the same antenna.
> Which brings me on to a question if I did have the ATU. 
> 
> If the two receivers are on different bands, but with only one antenna,
> presumably the sub still received through the ATU which may be a problem if
> the ATU is lossy on that band, so... can the ATU be bypassed on receive?
> 
> Mike
> 
> 
> 
> wayne burdick wrote:
> > 
> > Hi all,
> > 
> > The K3's main/sub band independence functionality is working quite 
> > well. To get it finalized, I'd like to find a few more enthusiastic 
> > testers to pound on it. The present code (rev 2.92) is at field-test 
> > level, so this is not for the risk-averse.
> > 
> > Please e-mail me directly if you're interested. I already have several 
> > names on my list and will be contacting everyone tomorrow.
> > 
> > 73,
> > Wayne
> > N6KR
> > 
> > ---
> > 
> > http://www.elecraft.com
> > 
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > 
> > 
>