[Elecraft] firmware suggestion for k3

[ON4WIX]

Actually the Kenwood TS-570 had such a scheme implemented. Whenever one 
would press the mode button one would get some CW feedback and I've never 
been confused by that feedback. Signalling for high SWR was both on-screen 
and by an "SWR" message in CW.

73
Glenn ON4WIX
----- Original Message ----- 
From: "Ian Maude" <ian at gb7mbc.net>
To: "elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Thursday, February 05, 2009 8:12 PM
Subject: Re: [Elecraft] firmware suggestion for k3


> Lee Buller wrote:
>>
>>
>> May I suggest "C" and "N"  The "C" is short hand in CW for yes (I
>> think it comes from the Spanish word for yes) and of course "N" would
>> be no.
>>
> C is normally sent if you choose the CW mode so I think this should be
> avoided for SWR purposes.  The normal for modes is the first letter, L
> for LSB, U for USB etc so these need to be avoided elsewhere.
>
> 73 Ian
>
> -- 
>
> Ian J Maude, G0VGS
> SysOp GB7MBC & HB9DRV-9 DX Clusters
> Member RSGB, GQRP, FISTS
> K2 #4044 |K3 #455
> http://www.amateurradiotraining.org
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/04/09 
16:35:00