[Elecraft] K3/ACLog interface failure

[W3CP]

I hope an ACLog user out there can give me a clue as to my trouble.
As a start the following is my description as sent to N5FJP(ACLog author).
.......................................................
There has been no success in interfacing my Elecraft K3 with my PC (XP OS)
when using your general logging program. A serial port is used with RS232
connectors. In the interface setup Elecraft was selected and all the other
blanks filled in as per the K3 manual. The ACLog test is never passed and I 
have
gone through the setup many times to be sure things have been entered
correctly.  I don't know what else to do and would appreciate your
suggestions.

As some added information. I used WriteLog in the recent CQ 160 Contest and
it interfaced with the K3 OK.  In the past my Yaesu FT1000MP Mark V
interfaced with your program just fine.
..............................................................
And this is the reply:

Hi Jim,

Thanks for your e-mail.? I don't have a K3 here so I'm not going to have any
specific advice on the settings.? Please feel free to post your question on
the N3FJP_Software_Users group and see is someone with a K3 can help.


73, Scott
N3FJP
http://www.n3fjp.com/
......................................................................

And it's certainly possible I'm doing something stupid; so I surely would
appreciate any suggested solutions to my problem.

My reasons for using ACLog for general logging were it is easy to install,
the stuff provided that I'm not interested in can be hidden, it can be used
as a log for special contests or parties such as QCWA,SOWP,PVRC.

73,  Jim  w3cp

.