[Elecraft] Elecraft Digest,Web site slow to load
Barry Middleton
bajubranston at ntlworld.com
Wed Feb 4 06:10:30 EST 2009
Hello Srewart,
I am on ntlworld.com and I have just checked my
down load speed 11.07Hrs 04/02/2009 and it is very fast, no delay at
all. Maybe you have a problem somewhere in the system.
73 de Barry G4DBS K2/100 owner.
elecraft-request at mailman.qth.net wrote:
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. Re: RTTY problem (Ed Steeble)
> 2. Re: ATU Manual Adjust not working ? (wayne burdick)
> 3. K3 Mods or Updates (W0MU Mike Fatchett)
> 4. Re: K3 Mods or Updates (Lyle Johnson)
> 5. ATU Manual Adjust not working ? (Mike Scott)
> 6. Elecraft Web Site - speed (Stewart Baker)
> 7. Re: K3 AM reception (Graham Kimbell (G3TCT))
> 8. Re: Elecraft Web Site - speed (Don Wilhelm)
> 9. Re: Elecraft Web Site - speed (Julian, G4ILO)
> 10. Elecraft Items For Sale (himself at BasicISP.net)
> 11. W1 housing? (Ken Kopp)
> 12. Re: Elecraft Web Site - speed (Grant Youngman)
> 13. Re: Elecraft Web Site - speed (Darwin, Keith)
> 14. Re: W1 housing? (Dave Van Wallaghen)
> 15. Re: K3 AM reception (Grant Youngman)
> 16. K3 interface to THP 1.5Kfx amp (Jim Spears)
> 17. (no subject) (Phil LaMarche)
> 18. PEP and forward power about double of set power (Greg Buhyoff)
> 19. Downloading K3 Config (Roy Morris)
> 20. K3 KDVR3 - Monitoring AF Play (Geoffrey Downs)
> 21. Re: PEP and forward power about double of set power
> (Julian, G4ILO)
> 22. K2 diffuser installation (Bill Miner)
> 23. Re: Downloading K3 Config (Julian, G4ILO)
> 24. K2 control board U6 pin 29,30 (Mike Weir)
> 25. Re: Downloading K3 Config (Dick Dievendorff)
> 26. [K3] KPA3 12v Sense Mod Question (Corboy-Poteet)
> 27. Re: K3 interface to THP 1.5Kfx amp (Phil & Debbie Salas)
> 28. Re: [K3] KPA3 12v Sense Mod Question (Ron D'Eau Claire)
> 29. KAT2 question abt voltage at U4, pin7 (KC9GBX at aol.com)
> 30. Re: KAT2 question abt voltage at U4, pin7 (Don Wilhelm)
> 31. K3 momentary loss of audio (W7TEA)
> 32. K3 RF knob Broken (Ron Hinton)
> 33. Re: K3 RF knob Broken (Jay Rodaman)
> 34. Re: K3 RF knob Broken (Doug Faunt N6TQS +1-510-655-8604)
> 35. Re: K3 RF knob Broken (wayne burdick)
> 36. Re: K3 RF knob Broken (Tom Hammond)
> 37. KX1 appears dead after KXB3080 PCB installed... ...Help
> please! (Shawn Morrow)
> 38. Re: K3 AM reception (Gill W4RYW)
> 39. Set power and actual measured power all square now (Greg Buhyoff)
> 40. Re: Downloading K3 Config (Roy Morris)
> 41. K2 power out (John)
> 42. Re: KX1 appears dead after KXB3080 PCB installed... ...Help
> please! (Don Wilhelm)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 03 Feb 2009 12:12:45 -0500
> From: Ed Steeble <esteeble at sc.rr.com>
> Subject: Re: [Elecraft] RTTY problem
> To: K3_Discussion_Group <elecraft at mailman.qth.net>
> Message-ID: <49887B0D.6070109 at sc.rr.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> I use Quick Mix <http://www.ptpart.co.uk/quickmix/> to save and restore
> my sound card setting. This program has saved me more than once.
> 73, Ed
> K3IXD
> K3 1726
>
>
> Date: Tue, 03 Feb 2009 15:14:41 +0000
> From: Brian Alsop <alsopb at nc.rr.com>
> Subject: Re: [Elecraft] RTTY problem
> To: Elecraft at mailman.qth.net
> Message-ID: <49885F61.3090405 at nc.rr.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Had the same thing happen after installing the new Google Earth today. I
> couldn't figure out what was changed in the audio pannel. Restoring
> computer to a state just before the Google Earth install solved the
> problem. 73 de Brian/K3KO N1IX wrote:
>
> > >I am having a problem with receiving RTTY signals. It worked before
> so I assume it is something I have set incorrectly.
> > >There is no display of anything on any of the RTTY applications. No
> waterfall, nothing at all. I have tried different computers and multiple
> applications with the same results. I have adjusted the line out item in
> the config menu to full scale.
> > >I plugged headphones into the line out jack I can hear the RTTY
> signal but it seems to be attenuated. Although I don't know how loud it
> should be.
> > >BTW: transmit doesn't work at all. That will be the subject of
> another email.
> > >Any help would be appreciated.
> > >
> > >Dave N1IX
> > >
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 3 Feb 2009 09:14:18 -0800
> From: wayne burdick <n6kr at elecraft.com>
> Subject: Re: [Elecraft] ATU Manual Adjust not working ?
> To: "CLAS OLOF BERGMAN" <classe.bergman at telia.com>
> Cc: Elecraft at mailman.qth.net
> Message-ID: <a814d0ed56ced03e99368216627d185d at elecraft.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
>
> Hi Clas,
>
> You must exit the menu after setting KAT3 to LC SET. Only then can you
> tap ATU TUNE and make adjustments to L and C.
>
> I'll make this clearer in the manual.
>
> 73,
> Wayne
> N6KR
>
> On Feb 3, 2009, at 8:24 AM, CLAS OLOF BERGMAN wrote:
>
>
>> Hi,
>>
>> I just downloaded lastest Firmware MCU 2.80/DSP 1.99 and tried for the
>> first
>> time to do manual ATU LC adjustments.
>> I can not manually change L or C with VFO A or B as it is described in
>> the
>> manual. After tapping "ATU TUNE", if I turn the VFOs they still just
>> scrolls through the menu settings but the radio is displaying a fixed
>> L and
>> C value.
>>
>
> ---
>
> http://www.elecraft.com
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 3 Feb 2009 10:30:42 -0700
> From: "W0MU Mike Fatchett" <w0mu at w0mu.com>
> Subject: [Elecraft] K3 Mods or Updates
> To: <elecraft at mailman.qth.net>
> Message-ID: <CA4341D2EF5F4984A7D5E057D2C3C211 at hamtower>
> Content-Type: text/plain; charset="US-ASCII"
>
> I was just curious if there have been any mods to the K3 Since June of Last
> year other than firmware. My unit still needs to have the Mic ground mod
> done.
>
> I ask this as my KRX3 is shipping so I will have the K3 open.
>
> I downloaded all the new manuals etc.
>
> Mike W0MU
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 03 Feb 2009 09:34:25 -0800
> From: Lyle Johnson <kk7p at wavecable.com>
> Subject: Re: [Elecraft] K3 Mods or Updates
> To: W0MU Mike Fatchett <w0mu at w0mu.com>
> Cc: elecraft at mailman.qth.net
> Message-ID: <49888021.90701 at wavecable.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>
>> I was just curious if there have been any mods to the K3 Since June of Last
>> year other than firmware.
>>
>
> Yes, please see < URL:http://www.elecraft.com/K3/k3_app_notes.htm >
>
> 73,
>
> Lyle KK7P
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 3 Feb 2009 09:50:32 -0800
> From: "Mike Scott" <mike at paxsen.com>
> Subject: [Elecraft] ATU Manual Adjust not working ?
> To: "'CLAS OLOF BERGMAN'" <classe.bergman at telia.com>
> Cc: Elecraft at mailman.qth.net
> Message-ID: <985060B8BEBB4A559992858B71E50C31 at DBQJ5V71>
> Content-Type: text/plain; charset="US-ASCII"
>
> Clas,
>
> I figured out what I was doing wrong with my manual antenna tuner
> adjustment.
>
> This is how to do it:
>
> 1. CONFIG KAT3: LC Set
> 2. Tap Menu to exit CONFIG menu
> 3. Tap ATU TUN
> 4. Adjust L and C parameters using VFO knobs
>
> The key was to exit the menu prior to tapping ATU TUN; the KAT3 will remain
> in manual LC Set mode until you change it again. I think possibly exiting
> the menu mode was left out of the procedure or I didn't understand what was
> written.
>
> Mike Scott - AE6WA
> Tarzana, CA (DM04 / near LA)
> K3-100 #508/ KX1 #1311
>
>
>
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 3 Feb 2009 17:54:28 GMT
> From: Stewart Baker <stewart at baker.nildram.co.uk>
> Subject: [Elecraft] Elecraft Web Site - speed
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Message-ID: <200923175428.121258 at shack>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Is it me, or is the Elecraft site very slow to load.
> At present it is a bit like kick starting a Snail.
>
> Stewart G3RXQ
>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 3 Feb 2009 17:56:43 -0000
> From: "Graham Kimbell \(G3TCT\)" <g3tct at lineone.net>
> Subject: Re: [Elecraft] K3 AM reception
> To: <n7ws at yahoo.com>, "Elecraft reflector" <elecraft at mailman.qth.net>,
> "Jim Garland" <4cx250b at muohio.edu>
> Message-ID: <008f01c98628$c8cd95a0$0602a8c0 at a>
> Content-Type: text/plain; charset="utf-8"
>
> Re the AM quality question I can't detect any "clicking" or other distortion
> but then there are no high quality AM BC transmissions round here - they're
> messed up either with selective fading or because the transmission comes
> from more than one location on the same frequency.
>
> The noise in between a string of dots is due to AGC PLS=nor. Setting AGC
> PLS = off cures it.
>
> 73
> Graham
> ----------------------------------------------
>
> From: "Wes Stewart" <n7ws at yahoo.com>
> [snip]
> Now it might be argued that these artifacts are at such a low level they
> would not be audible as distortion. Maybe, but they represent essentially a
> "static" situation. When listening to a string of dots sent with my '870
> the difference between fast and slow AGC is clearly audible. When the
> signal is S4 or 5, with fast AGC there is garbage that essentially sounds
> like an increased noise level.
>
> A simple test such as tuning in WWV and listening to the voice ID and
> hearing the audio distortion and syllabic "clicking" disappear when simply
> turning the AGC off and turning the RG gain down appropriately indicates a
> real problem.
>
> If there are K3s out there that don't do this, then I want one of them.
>
> Wes N7WS
>
>
>
>
>
>
>
>
>
> ------------------------------
>
> Message: 8
> Date: Tue, 03 Feb 2009 13:00:08 -0500
> From: Don Wilhelm <w3fpr at embarqmail.com>
> Subject: Re: [Elecraft] Elecraft Web Site - speed
> To: Stewart Baker <stewart at baker.nildram.co.uk>
> Cc: Elecraft Reflector <elecraft at mailman.qth.net>
> Message-ID: <49888628.9050604 at embarqmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Stewart,
>
> Look to your internet provider for the problem - the Elecraft site loads
> in about 2 seconds here, and no it is not coming from the computer cache
> - I tried a page re-load too.
>
> 73,
> Don W3FPR
>
> Stewart Baker wrote:
>
>> Is it me, or is the Elecraft site very slow to load.
>> At present it is a bit like kick starting a Snail.
>>
>> Stewart G3RXQ
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.0.233 / Virus Database: 270.10.16/1930 - Release Date: 02/02/09 07:51:00
>>
>>
>>
>
>
> ------------------------------
>
> Message: 9
> Date: Tue, 3 Feb 2009 10:25:34 -0800 (PST)
> From: "Julian, G4ILO" <julian.g4ilo at gmail.com>
> Subject: Re: [Elecraft] Elecraft Web Site - speed
> To: elecraft at mailman.qth.net
> Message-ID: <1233685534660-2264830.post at n2.nabble.com>
> Content-Type: text/plain; charset=us-ascii
>
>
>
>
> Stewart Baker wrote:
>
>> Is it me, or is the Elecraft site very slow to load.
>>
>>
> It's you, or possibly your computer. :) It's as quick as anything here.
>
> -----
> Julian, G4ILO. K2 #392 K3 #222.
> http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
> Directory http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.233 / Virus Database: 270.10.17/1931 - Release Date: 02/02/09 19:21:00
>
>
More information about the Elecraft
mailing list