[Elecraft] K3 RF knob Broken

[WILLIS COOKE]

I don't know where to get better ones but I repaired the knobs that broke with 30 min epoxy and they worked for a while.  I called Elecraft and they sent a set under warranty and I bought two more sets.  They are not expensive, but the shipping and handling is, co I bought three new sets.  My outer ring broke and while I was looking at it the inner knob broke also.  Elecraft could do well if they found something better quality.

Willis 'Cookie' Cooke
K5EWJ


--- On Tue, 2/3/09, Ron Hinton <rjhinton at verizon.net> wrote:

> From: Ron Hinton <rjhinton at verizon.net>
> Subject: [Elecraft] K3 RF knob Broken
> To: elecraft at mailman.qth.net
> Date: Tuesday, February 3, 2009, 4:45 PM
> Has anyone other then me had one of the inter knobs for the
> RF or AF gain break?  Came in, turned on the rig and reached
> up and turned the RF gain down and low and behold the little
> knob fell off the shaft.  It was broken right where one of
> the set screws was located.  I see there is no brass bushing
> in the knob for the setscrew to be threaded into.  Do you
> know where some better quality ones can be purchased?
>
> Ron
> NA9F______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html