[Elecraft] K2 control board U6 pin 29,30

[Mike Weir]

Hi all,
Just finished the control board and did the infamous resistance checks. All but U6 pin 29 and 30 check out ok. 
1) Pin 29..... 95.9 ohms with a radio shack multimeter
                  96.5 with a Beckman 310 multimeter.

2) Pin 30......95.8 with the radio shack meter
                  96.3 with the Beckman

I have read the posts regarding these checks and I have reversed the leads on both multimeters and had the same readings. Checked out the soldering at U6, RP4 and P3 as well. U6 seems to be seated just fine as well. They seem to be within 10% of the recommended high end readings but just want to make sure.
Thanks
Mike
VE3WDM 
Serial 06613

_________________________________________________________________
So many new options, so little time. Windows Live Messenger.
http://www.microsoft.com/windows/windowslive/messenger.aspx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090203/986418cb/attachment.html