[Elecraft] K3 RTTY problem

[R. Kevin Stover]

Which program are you using?
Did this ever work?
What changes have you made since it worked?

The line out on the K3 is a low level line out and would sound 
attenuated compared to the level on the speaker/phones jack. You've got 
the level as high as it will go on the K3, swapped the audio cable for a 
known good one, time to start looking at the sound card and application 
settings on the computer.


n1ix1 at aol.com wrote:
> 
> 
> 
> I posted this Sunday bust since then I have been having email problems.
> If you responded please send it again.
> 
> 
> I am having a problem with receiving RTTY signals. It 
> worked before so I assume it is something I have set incorrectly.
> 
> 
> There is no? display of any text or even jiberish on any of the RTTY 
> applications. No waterfall, nothing at all. I have tried different computers and 
> multiple applications with the same results. I have adjusted the line out item 
> in the config menu to full scale.  I have replaced the cable between line out and the computer.
> 
> 
> I plugged headphones into the line out jack I can hear the 
> RTTY signal but it seems to be attenuated. Although I don't know how loud it 
> should be. I think it should be louder that it is.
> 
> 
> 
> BTW: transmit doesn't work at all. That will be the 
> subject of another email.
> 
> 
> Any help would be appreciated.
> 
> 
> ?
> 
> 
> Dave N1IX


-- 
R. Kevin Stover, ACØH