[Elecraft] CW Pitch

[Guy Olinger, K2AV]

Hi, Dave,

If what you are saying  is that you want to hear a different band of tone in 
each ear, say 400-550 in the left ear and 550-700 in the right, that is 
easily done by setting the shift.  Set the shift for the left as you want it 
for main RX.  Then hold BSET to get b SEt display, the shift control will 
now move the heard tones bandwidth in the subreceiver. Adjust the shift for 
the right ear.

There are a plethora of adjustments available in the K3, and they are being 
extended by Elecraft based on the user community.  Takes a bit of time to 
learn them.

73, Guy

----- Original Message ----- 
From: "David Gilbert" <xdavid at cis-broadband.com>
To: <elecraft at mailman.qth.net>
Sent: Monday, February 02, 2009 2:45 AM
Subject: [Elecraft] CW Pitch


>
> I only completed my new K3 (complete with subreceiver) a couple of days
> ago, and it's my first experience with true dual receive with stereo
> headphones.  I suppose that with time and practice I'll become more
> proficient at copying different signals in each ear, but at present I
> find it easier to do so if the CW pitch in one ear is different than in
> the other ear.  With a really narrow bandwidth (say 250 HZ roofing and
> 200 Hz DSP), though, there isn't much room for a shift in tone before
> the desired signal starts sliding down the skirt.  Is there any way to
> set the CW pitch separately for the main receiver and the subreceiver?
> I've searched both the manual and the reflector archives and haven't
> found any mention of separate pitch at all, either yes or no.
>
> Thanks much es 73,
> Dave   AB7E
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>