[Elecraft] Questing On Tuning Different Band with SUB Receiver

[Dave Zeph]

Wayne .. I know that you are still working on the code to allow the SUB
Receiver to tune a different Band than the MAIN Receiver.

 

I will be using a K3 on 6M with two antennas connected to ANT-1 and ANT-2 -
one a Yagi and the other Horizontal Loop.  Sometimes both receivers will be
used with the two 6M antennas.

 

The K3 will be also be used with a XV-144 Transverter.  At other times I'd
like to use the Main Receiver on 6M, while monitoring 2M with the SUB
Receiver.  The only way I can see to have the XV-144 Receiver Active - while
also being able to Transmit immediately - is to connect the XV-144 to the
Transverter Input and Output.  However these are only activated (I think)
when the appropriate CONFIG item has been set to add the Transverter to the
Band Up / Down Selector.

 

My question is whether there's any way it will be possible to have 6M on one
Receiver, and 2M on the other?  It's not obvious to me which is why I
decided to ask.

 

 

73---->Dave, W9ZRX

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090202/c7bcc232/attachment.html