[Elecraft] K3 problems

[Julian, G4ILO]

Julius Fazekas n2wn wrote:
> 
> Hi Julian,
> 
> I've tried that once...
> 
> Is there a "reset to factory default" option? I don't suspect it's the
> firmware load, but it's worth trying again.
> 
> Cheers,
> Julius
> 
> 
"Reset to factory default" would have to somehow restore whatever firmware
version it came with. There is a "reinitialize all parameters to defaults"
option, described in the manual under Parameter Equalization (page 61 in my
copy.) If you do that you'll have to re-do all the menu parameter settings,
which you may never have done before if yours is a ready built radio. You
can save all the settings using the firmware utility and then restore them
(also described on that page of the manual) though if you do that I suppose
you could be restoring whatever setting is causing the trouble. Still, it
would seem to be the logical next step, if reloading the firmware hasn't
cured the problem.

-----
Julian, G4ILO. K2 #392  K3 #222.
http://www.g4ilo.com/ G4ILO's Shack   http://www.ham-directory.com/ Ham
Directory    http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 
-- 
View this message in context: http://n2.nabble.com/K3-problems-tp2253876p2255559.html
Sent from the Elecraft mailing list archive at Nabble.com.