[Elecraft] K3 RTTY problem

[Dave Hachadorian]

One thing to check:

In DATA mode, press and hold the PITCH button. The displayed 
mark and shift frequencies must match MMTTY or whatever 
decoding program you are using. Which program or TU are you 
using?

Dave Hachadorian, K6LL
Yuma, AZ

----- Original Message ----- 
From: "N1IX" <n1ix at verizon.net>
To: <elecraft at mailman.qth.net>
Sent: Sunday, February 01, 2009 9:17 PM
Subject: [Elecraft] K3 RTTY problem


I am having a problem with receiving RTTY signals. It worked 
before so I assume it is something I have set incorrectly.
There is no  display of anything on any of the RTTY 
applications. No waterfall, nothing at all. I have tried 
different computers and multiple applications with the same 
results. I have adjusted the line out item in the config 
menu to full scale.
I plugged headphones into the line out jack I can hear the 
RTTY signal but it seems to be attenuated. Although I don't 
know how loud it should be.
BTW: transmit doesn't work at all. That will be the subject 
of another email.
Any help would be appreciated.

Dave N1IX


--------------------------------------------------------------------------------


> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: 
> http://www.qsl.net/donate.html