[Elecraft] ERR PTT
Duncan Carter
dc at vibrotek.com
Wed Dec 30 18:33:42 EST 2009
It's an occasional problem that started after a recent firmware upgrade
and happens with nothing connected. It clears after I stop and re-start
the power supply, stopping the power supply being required because
nothing else has any effect, and then tap the power button. So far,
it's not enough of a problem to warrant any dis-assembly.
Dunc, W5DC
Joe Planisky wrote:
> Hi Dunc,
>
> Are you saying that you got the ERR PTT indication when nothing was
> connected to the rig or at least you couldn't find a definite cause
> for it? That's what happened to me. I was getting ERR PTT with
> absolutely nothing but power and antenna connected to the rig. After
> partial disassembly for inspection, everything started working again.
> I never did find a definite cause.
>
> 73
> --
> Joe KB8AP
>
> On Dec 30, 2009, at 2:51 PM, Duncan Carter wrote:
>
>> Pardon my bad grammar. When this happens on start-up, the PTT line from
>> the mike is not closed and neither is any key line.
>>
>> Duncan Carter wrote:
>>> No, when it's happened on my K3, the PTT line should be open/clear and
>>> neither is a key line.
>>>
>>> Dunc, W5DC
>>>
>>> Grant Youngman wrote:
>>>
>>>> Does the ERR PTT go away if the PTT line is unasserted after the
>>>> error message appears?
>>>>
>>>> Grant/NQ5T
>>>>
>>>> On Dec 30, 2009, at 4:18 PM, Duncan Carter wrote:
>>>>
>>>>
>>>>
>>>>> I've found the same problem and this problem seems to be of recent
>>>>> origin.
>>>>>
>>>>> Dunc, W5DC
>>>>>
>>>>> Joe Planisky wrote:
>>>>>
>>>>>
>>>>>> Hi Wayne,
>>>>>>
>>>>>> One more item for your list. I just ran into an "ERR PTT" situation
>>>>>> and discovered that you can't turn the rig off while ERR PTT is
>>>>>> showing. I.e. it doesn't respond to pressing the POWER button. I
>>>>>> understand the need to disable most all functionality until the ERR
>>>>>> PTT is cleared, but disabling the ability to turn the rig off
>>>>>> seems a
>>>>>> step too far.
>>>>>>
>>>>>>
>>>> ______________________________________________________________
>
>
More information about the Elecraft
mailing list