[Elecraft] K3 needs survey -- firmware and application software

[Duncan Carter]

Pardon my bad grammar.  When this happens on start-up, the PTT line from 
the mike is not closed and neither is any key line.

Duncan Carter wrote:
> No, when it's happened on my K3, the PTT line should be open/clear and 
> neither is a key line. 
>
> Dunc, W5DC
>
> Grant Youngman wrote:
>   
>> Does the ERR PTT go away if the PTT line is unasserted after the error message appears?  
>>
>> Grant/NQ5T
>>
>> On Dec 30, 2009, at 4:18 PM, Duncan Carter wrote:
>>
>>   
>>     
>>> I've found the same problem and this problem seems to be of recent origin.
>>>
>>> Dunc, W5DC
>>>
>>> Joe Planisky wrote:
>>>     
>>>       
>>>> Hi Wayne,
>>>>
>>>> One more item for your list.  I just ran into an "ERR PTT" situation  
>>>> and discovered that you can't turn the rig off while ERR PTT is  
>>>> showing.  I.e. it doesn't respond to pressing the POWER button.  I  
>>>> understand the need to disable most all functionality until the ERR  
>>>> PTT is cleared, but disabling the ability to turn the rig off seems a  
>>>> step too far.
>>>>       
>>>>         
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>   
>>     
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>