[Elecraft] Transverter Cabling Parts for K3

[Sanger, Joseph]

thanks so much, don ... i've already dropped a line to the parts dept!

have a very happy new year!
________________________________________
From: Don Wilhelm [w3fpr at embarqmail.com]
Sent: Tuesday, December 29, 2009 9:51 PM
To: Sanger, Joseph
Cc: don at w3fpr.com; Elecraft Reflector
Subject: Re: [Elecraft] Transverter Cabling Parts for K3

Joe,

The parts to make up the cable are provided with each XV series
transverter.  If you purchased yours used and the prior owner did not
include the cables, you may order that cable, connector and backshells
(clamp included with the backshell) from Elecraft.  Just look in the
parts section of the XV series manual for the part numbers.  It is not
an assembled cable, but the XV manual does provide the connection
information.

73,
Don W3FPR

Sanger, Joseph wrote:
> Thanks, Don ... I know (more or less!) what I need to do ... just that I am having trouble locating connectors that ... appear well suited to creating these cables ... with strain relief, locking hardware, etc ... actually, I wonder why Elecraft hasn't made this hardware available for purchase ... that would make (my) life a bit easier!
>
> :-)
> ________________________________________
> From: Don Wilhelm [w3fpr at embarqmail.com]
> Sent: Tuesday, December 29, 2009 8:06 PM
> To: Sanger, Joseph
> Cc: Elecraft Reflector
> Subject: Re: [Elecraft] Transverter Cabling Parts for K3
>
> Joseph,
>
> Take a look at the XV transverter Owners Manual (download from
> Elecraft).  IIRC, you will find that daisy chain cabling pictured.
>
> 73,,
> Don W3FPR
>
>

------------------------------------------------------------
This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain information that is proprietary, confidential, and exempt from disclosure under applicable law. Any unauthorized review, use, disclosure, or distribution is prohibited. If you have received this email in error please notify the sender by return email and delete the original message. Please note, the recipient should check this email and any attachments for the presence of viruses. The organization accepts no liability for any damage caused by any virus transmitted by this email.
=================================