[Elecraft] Help, please. K3 and PSK31

[Mike]

Dave -
I'm not using an interface. Line-out from the K3 to line-in on the 
computer and line-in to the K3 from line-out of the computer. 1/8 inch 
stereo cables (tip,ring,sleeve) unmodified. MAIN: MIC+LIN, and vox on. HTH.

73, and HNY!

Mike NF4L

David Lankshear wrote:
> I'm getting round to trying PSK31 and later maybe some other data modes.
>
> I want to use either the stereo line out source or the headphones socket on the back panel of the K3, which is getting mighty full of connections these days.
>
> I could use some advice from the collective HI!
>
> Should I use a stereo jack with tip active, sleeve ground and ring unconnected, or should ring and tip be paralleled for use with line out? 
>
> Would I be best using the line out or headphone socket (with configuration speakers+phones=yes)?
>
> Also, if anyone has experience of using the Tigertronics Signalink USB with the K3 I'd be very interested to have your comments.
>
> Grateful thanks for any assistance and a very Happy New Year to all my readers HI!
>
> 73  DaveL  G3TJP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>