[Elecraft] Request for new firmware changes.

[Richard S. Lindzen]

How does TRX manager implement the bandscope?

Dick, KA1SA

At 08:25 PM 12/26/2009, van fair wrote:
>I have been reading all the things that owners want and many of them 
>I already have by using TRX manager. I use LP Bridge with it but you 
>can get the same results by using the same type of circuits built 
>into the TRX manager.
>
>Laurent the owner of TRX Manager is a K3 owner and user and has made 
>it possible to control 95% of all functions with the click of a 
>mouse. I have 8 macro buttons which make it possible to do all kind 
>of splits. a tune up button that turns on a carrier at 5 watts and 
>when I push it again it takes me back to my regular settings and at 
>40 watts that I use for  driving my linear.  You dont even have to 
>use the K3 utility to program the Macro. Its all done very easily 
>inside TRX manager. All eight macro buttons can be used in dual mode 
>so that one push performs a function and the second push of the same 
>button can take you back to a different setting.   This is not 
>available from the K3 utility. All the menu and config  items can be 
>brought up from a list and changed  from inside the TRX manager program.
>
>Many many other advantages to using this program with the K3 such as 
>memory control etc. Its free for 30 days and it has so many things 
>to offer the K3 user. Make sure you bring up both of the control 
>panels for the K3. The levels panel does not come up unless you are 
>connected to a K3.
>
>I have no financial connection with TRX manager. I have just use it 
>for years.  Van W4GIW
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html