[Elecraft] K3 Data mode power creep

[Don Wilhelm]

Elliiot,

That might be the normal power control "sneaking up" to your power 
setting.  Is your power set at 100 watts?

As a second comment, I hope you are not running PSK31 with 100 watts 
power - 25 watts or less is sufficient to work the world, on that mode, 
one just bothers the "neighbors" running higher power.

73,
Don W3FPR

Elliott Lawrence wrote:
> I've reset everything for Data A.....ALC 4-5 bars and the power still creeps 
> from about 80 to 100w in about 5 seconds.  After that, as long as their is 
> no further mode change the power is always 100w without any creep.
> Elliott WA6TLA
>   
>