[Elecraft] K3 Data mode power creep

[Elliott Lawrence]

Yesterday I noticed the same issue on the RF power output using Data A.  I 
didn't have the problem before.  I recently shifted to V3.68 and I wonder if 
that could be the issue.  Once the power increases to the 100w level which 
takes about 10-15 seconds it remains the same for future transmissions.

73
Elliott WA6TLA

----- Original Message ----- 
From: "Steve Ellington" <n4lq at carolina.rr.com>
To: <Elecraft at mailman.qth.net>
Sent: Thursday, December 24, 2009 10:17 AM
Subject: [Elecraft] K3 Data mode power creep


> When using DATA A with an external sound card the RF power creeps upward. 
> I
> start out with 20 watts and after a minute or so I look and my power is at
> 100 watts. I quickly turn down the line input either at the K3 or sound
> card.
> I've noticed this with 2 different computers and several sound cards. What
> could cause this?
> Steve
> N4LQ
> N4LQ at carolina.rr.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html