[Elecraft] K3 needs survey -- firmware and application software

[N2TK, Tony]

Is there any way to setup the K3 utility through LP-Bridge to send macros
for the utility program to the K3 without having to close LP-Bridge then
starting the K3 utility program? I understand that you have to close the
LP-Bridge for downloading updates. I guess the same applies to the macros.
But thought I would ask.

73,
N2TK, Tony

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dick Green WC1M
Sent: Wednesday, December 23, 2009 5:31 PM
To: 'Dick Dievendorff'; 'Julian, G4ILO'; elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 needs survey -- firmware and application software

Dick,

LP-Bridge acts as a traffic cop that allows multiple programs to share the
K3 COM port without interfering with each other. It opens the K3 COM port
and sends various commands to obtain a continous flow of commonly-sought
status information. It intercepts status commands from multiple programs
attached to virtual COM ports and routes the appropriate status information
to them. When a program sends a command to the K3 that elicits a specific
reponse, the response is sent back to that program only.

73, Dick WC1M

> -----Original Message-----
> From: Dick Dievendorff [mailto:dieven at comcast.net]
> Sent: Wednesday, December 23, 2009 3:35 PM
> To: 'Julian, G4ILO'; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 needs survey -- firmware and application
software
> 
> Would the loggers object to receiving responses to commands that they
didn't
> issue?
> 
> Dick, K6KR
> 
> 
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Julian, G4ILO
> Sent: Wednesday, December 23, 2009 12:28 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 needs survey -- firmware and application
software
> 
> 
> 
> 
> Dick Dievendorff wrote:
> >
> > Would you dedicate the K3's serial port to this function?  Instead of a
> > contest logger?
> >
> 
> Why would you need to, given LP-PAN, VSPE etc?
> 
> -----
> Julian, G4ILO. K2 #392  K3 #222.
> * G4ILO's Shack - http://www.g4ilo.com
> * KComm - http://www.g4ilo.com/kcomm.html
> * KTune - http://www.g4ilo.com/ktune.html
> 
> --
> View this message in context:
>
http://n2.nabble.com/K3-needs-survey-firmware-and-application-software-tp420
> 9832p4210432.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html