[Elecraft] W2 interface program

[a yoshida]

I have checked more since then.
This problem has been finally disappeared when PC/RigExpert Plus were
re-booted.  

73
aki  ja1nlx



eric norris wrote:
> A YOSHIDA wrote:
>
> (2)When clicking Setup button my K3 repeat transmitting intermittently
> untill it opens Ssetup window.
>
> W2 interface program ver 1.0.12.16
> W2 FW ver 0.92
>
> -SNIP-
>
> I have the same problem.  I'm using W2 FW .93, and interface program 1.0.12.16.  I am using a serial to cardbus adapter, K3 is on COM13, W2 on COM14.  Two sensors on the W2, both HF 2KW, SWR LOCK on.  
>
> It will key the rig three or four times for all combinations of PTT-RTS setting except OFF OFF.  However, when set to RTS-OFF or DTS-OFF
> , the tx intervals are much shorter.  K3 is in CW mode, 7 Mhz, QSK VOX on
>
> Thanks, 
>
> Eric WD6DBM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>