[Elecraft] Line out

[Don Wilhelm]

Also, you might want to check your cable with an ohmmeter - the comment 
below caused me to recall a year at Dayton when I had to make up a cable 
in the hotel room - went to Rat Shack and bought a couple stereo plugs.  
Darn if both of them were bad, no connection from the tip to the solder 
lug, and these were new plugs.

73,
Don W3FPR

Richard Ferch wrote:
> 4. My experience has been that there is some variability among 3.5 mm 
> (1/8-in) phone connectors; some combinations of plugs and jacks do not 
> always seem to make reliable contact. If you are only getting output 
> from the right channel, it sounds as if perhaps the plug is not pushed 
> all the way into the LINE IN jack.
>
>   
>