[Elecraft] Line out

[Iain MacDonnell - N6ML]

Larry,

If your speaker is not getting turned off when you plug headphones in,
you probably have CONFIG:SPKR+PH set to "yes". Try changing that to
"no".

It is NOT normal for the main receiver to be absent from line out.
Make sure you are looking at the left channel (should be on the tip of
the connector). The main RX should be on the left channel, and the sub
on the right (ring).

    ~Iain / N6ML



On Tue, Dec 22, 2009 at 3:13 PM,  <Telegrapher at att.net> wrote:
> Gloomy weather this morning so unlike Arizona weather.  Anyway the other day someone posted a note about Config:spkrs:2 for turning off the speakers.  Yep because of my hearing going down hill i run the K3 that way.  However, in that configuration only the SUB rx is disabled from  the speaker and not the main rx.  Now when i've got the headpbnes on, i can hear both rx in there but again, the main rx is still on the speaker.  Along the same lines, when i listen to JT-65 or WSPR or any of the digital modes i have to use the Aux rx as i never have gotten any audio from the main rx thru the "line out" jack.  I wouldn't think that is normal.  It's been this way ever since i bought the radio this past July and i've only done one upgrade software wise.  WHY?  With all the complaints i have read about i decided i wasn't going to do any software changes until things settled down.  Anyone have any ideas as to why the audio as i've described above is doing what it's doing?  It's not kil
>  ling me other than curiosity wise and the idea that i'd like to have it working right.
>
> Larry
> W0OGH
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>