[Elecraft] K2 KAT2 tuner SWR readings

[Don Wilhelm]

Ivan,

Note the "f" and the "r" in the display.  That tells that the display is 
showing both forward power and reflected power - and not SWR.  The other 
2 displays are the computed SWR.

All is well, go try your random wire (but stay warm).

73,
Don W3FPR

Ivin Flint wrote:
> With a little help from Don W. I seem to have my KAT2 up and going pretty good and it sure is nice to have a built-in auto tuner again.  My last QRP rig was a Icom 703 which also has a nice auto tuner.  
>
> Here is my question.  There are three ways to see SWR from what I understand.
> 1) holding the tune button putting the tuner into tune mode and seeing where the SWR ratio ends.
> 2) holding RF/ALC& Tune putting it into Pout mode and seeing forward/reflected power.
> 3) going into the menu X.X-1 mode.
>
> On my off center fed dipole I read on 20M  the following in the above mentioned order.
> 1.8 - 1
> 5.4 f  -  .8r
> 1.8 - 1
>
> So I guess the x.x-1 is directly re-displaying what was displayed at the end of a tune function, but I don't understand why I get two different readings between the Pout reflected .8  and the other two 1.8.  Is it just my own mis-understanding of what is being shown?  .8 and 1.8 is exactly 1 off, but I'm obsessed right now with wanting to be sure the tuner is working as it should and I can trust that it is doing it's job.  
>
> As soon as I am confident things are working right I want to go out in the FREEZING outdoors and try my random wire.  I can't wait to get out into the woods again and enjoy the tuner.
>
>   
>