[Elecraft] [MM] W2 with 0.92 FW and VHF sensor unit

[Phillip Buckholdt]

My W-2 behaves in exactly the same way with the basic meter. Using the new 
software, it is stuck in the 2W range when using auto. I am using a IC-7000 
on 2.

     Phil
     K8MBY K-3 #609

----- Original Message ----- 
From: "Ed-AE5FV" <ae5fv at arrl.net>
To: <elecraft at mailman.qth.net>
Sent: Wednesday, December 16, 2009 10:00 PM
Subject: [Elecraft] [MM] W2 with 0.92 FW and VHF sensor unit


>
> I received my W2 VHF sensor today and believe there may be a problem when
> AUTO mode is selected on the W2 display unit. There is no illumination 
> from
> the POWER or SWR LEDs when in this configuration. If manual 2/20/200 W
> ranges are selected, the POWER and SWR LEDs illuminate normally with power
> inputs between 1-25 Watts. While using the 200 W HF sensor, AUTO and all
> manual modes are displaying normally at power levels between 1-100 W. Has
> anyone else noticed this behavior?
>
> Thanks & 73,
> Ed / AE5FV
> -- 
> View this message in context: 
> http://n2.nabble.com/W2-with-0-92-FW-and-VHF-sensor-unit-tp4179416p4179416.html
> Sent from the [MM] mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>