[Elecraft] PSK31

[Joe Subich, W4TV]

You should be able to increase the input gain in your 
soundcard in order to make Multimode decode correctly. 
The K3 has more than adequate level even with Line Out 
= 10 to drive most quality soundcards at input gain
around 50%.  

In any case, cocoaModem is a much superior digital 
application - and it's free.  The author is among the 
few who really understand the behavior of digital signals 
on HF/MF paths.  See: 
http://homepage.mac.com/chen/w7ay/cocoaModem/index.html 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Richard Thorpe
> Sent: Friday, December 11, 2009 12:42 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] PSK31
> 
> 
> I'm using  "MultiMode" with my Mac and K3 to decode PSK31.  I cannot  
> get enough level out of the "stereo out" on the K3 to get a good  
> decode, even though I adjust in software on the K3.  What am I doing  
> wrong?  The Mackintosh platform is limited when it comes to radio  
> software. Are there any other choices?
> 
> R Thorpe KD6LAZ