[Elecraft] PF-1 macro help needed

[Greg]

Ralph,

Off the top of my head use the command to display the TX or RX EQ and 
then use the switch command for the CLR button.  That should zero out 
all the  EQ settings.  I don't think you can turn them on or 
off......they're on all the time.  But zeroing out the setting would 
have the same effect as turning it off.

Try MN008; SWT53; MN255;  this would be for the RX EQ.

Let me know how this works...I'm not in the shack right now.

Substitute MN008 with MN009 for the TXEQ.

73
Greg
AB7R


Ralph Parker wrote:
> Is it possible to program a PF-1 macro to turn the audio equalizer ON/OFF?
> My CW is OK, but my programming isn't :-)
> Maybe I need a newer manual.
>
> VE7XF
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>